Where is the heater machine factory for Industrial heating element
filling machine? Is there a supplier make Industrial heating
element filling machine? How to custom Industrial heating element
filling machine from China? May in Zhaoqing Feihong now shares our TLQ-24 mgo powder filling machine with you. Welcome to order heater machines.
TLD-24 Fast Filling Machine is a stand-alone order mechanism. It
works in the same way with the TLQ-24.Both TLD-24 and TLQ24 are of
the single-direction mechanism, namely, single-deck guiding pipe.
It equips mandrel inside the pipe, which serves to locate the
heating wire module.
At the top of the pipe, there is a linear cutting binding head
weld; it is coupled with the hole inside the pipe. Magnesium powder
flow down from the outside of the guiding pipe. Great capacity and
accelerative filling speed are the main advantages of this machine,
while density deficiency is the chief disadvantage, which usually
is around 2.15g/cm3.
The binding head would be easily stuck inside the pipe which leads
to the failure of filling if the density is increased. The machine
adopts gear motor to drive the rising of the guiding pipe
mechanism, which is more stable comparing with the gas liquid
turning mechanism. This machine uses PLC touch screen to control,
the length of filling will be more correct.
The machine suitable for short tubes in large diameter.
Fast filling: about 6000-8000 PCS / 8 h.
Com.: Zhao Qing City Feihong Machinery & Electrical Co.Lt
Add.:Shui Ji Village, Dachong,Duanzhou District, Zhaoqing City,
Guangdong Province, China
Mob/Whatsapp/Wechat : (86)13424485791
Tel.:(86-758) 2777769 / 2777869/ 2777969